230V AC
254 x 180 x 63 mm
4 x DI / 1 x DO
4 x AI / 1 x AO
0,9 A
IP66
GSM / LTE / Wi-Fi / LAN
English, German, French, Dutch, Spanish
Instant alerts via Telegram App, email, or web alarm.
In case of emergency, an alarm message (worldwide) will be received immediately, providing further details of the failure and reducing potential cost on damages.
Real time data collection and evaluation via cloud.
The real-time evaluation provide access to the data that the sensors connected to Tsurumi Connect delivered to the cloud.
Monitoring parameters (Water level, Amperage, Flow, Pressure, Numbers of ON/OFF and more)
Set up parameter(s) for when you need to receive the alarm alert
Report created via cloud can be sent daily by excel
Data collection and evaluation via cloud can create a plan of the maintenance cycle
Yes of course! Please consult Tsurumi!
Remote control featuring unique access codes
Automatic operation
Enter a time delay on level reach, to stop pumping
Set a minimum time that the pumps shall run in case of alarm water level
For quick remote control, all pumps are switched OFF or ON. Other presets disabled.
For quick remote control, Pump 1 is OFF while Pump 2 is ON. Other presets disabled.
Control the pumps by date and time.
Yes of course! Please consult Tsurumi!
System shall send an alert if blocking or clogging is detected
Automatically run the pump backwards in order to unclog itself.
Detects if the pump is in slurping condition and stops pumping for a time defined by you to save energy.
Yes of course! Please consult Tsurumi!
For the use with backup pump or double pump station
Pumps running alternately to have equal running times
Set up timing and switching for the boosting pump or base pump of a booster installation.
Aeration preset designed to be used with oxygen probe
Yes of course! Please consult Tsurumi!
The Tsurumi Connect Box provides all the smart features.
To use Tsurumi Connect as a mobile installation, TCP module is necessary.
The purpose of this device is to control the pump, monitor the phases and the current.
Special circuit board is integrated into the motor protection plug CEE16A or CEE32A.
(Depending on the size of the pump, a Motor Protection Plug Box will be used instead)
To use Tsurumi Connect in a control cabinet, you need the TCS Current Sensors.
This device controls the pump, monitors the phases and the current.
Different types of current sensors are available according to the amperage of pump(s).
For pump(s) higher than 120 Ampere, there is a Tsurumi Connect Adaptor for external LEM 4-20mA.
In this case, third party LEM with 4-20mA output is also necessary.
(Note: LEM should be around double the ampere of total amount of pumps)
The control cabinet is available from Tsurumi for a complete package of solution.
External LTE Antenna Set with magnet stand and lightning protection.
This antenna set increases the connection strength for the mobile network connection.